Unboxing Your New S Racer Gaming Chair

29 Nov Unboxing Your New S Racer Gaming Chair

Welcome to your new S Racer gaming chair! As an expert, you’re probably eager to get it assembled and start gaming in comfort. However, it’s important to first review the setup process in detail to ensure a smooth and efficient assembly. This will help you anticipate any challenges or requirements before beginning the process. So, let’s dive into the technical aspects of the S Racer gaming chair assembly together.

Step 1: Check Your Parts

Carefully open up the box and remove all the parts. You should have:

• 1 chair base with casters
• 1 gas lift cylinder
• 1 tilt mechanism and control knob
• 1 backrest assembly
• 1 seat assembly
• 1 headrest pillow and 1 lumbar support pillow
• 1 set of tools (allen wrench and screws)
• 1 instruction manual

Double check you have all the parts listed. If anything is missing, contact the seller right away before proceeding.

Step 2: Attach the Base

Let’s start by attaching the base. This is the five-legged rolling base that lets you move around.

1. Turn the base upside down so the casters are facing up.
2. Take the gas lift cylinder and feed it up through the hole in the center of the base. It should poke up through the top.

Next up is securing the tilt mechanism to the base. The tilt mechanism is the part that connects the seat to the base and allows you to recline.

1. There are 5 holes on the tilt mechanism that line up with the 5 legs of the base. Orient the tilt mechanism so the holes match up.
2. Insert the screws in the holes and tighten them up nice and snug with the allen wrench.

Alright, the base is ready to roll. Let’s move on to the next step.

Step 3: Attach the Hydraulic Cylinder

Here’s where we connect the gas lift cylinder to the tilt mechanism. This cylinder allows you to raise and lower the height of your chair.

1. Take the end of the cylinder that’s poking up through the base and insert it into the opening on the tilt mechanism. You’ll need to push firmly to get it seated inside.
2. Now take the plastic protective cover and slide it down over the cylinder so it rests on top of the tilt mechanism. This just keeps the hydraulic grease off your clothes.

Step 4: Install the Backrest

Moving right along. Time to bolt on the backrest to the tilt mechanism. This is the part you’ll actually be leaning back on, so make sure it’s secure.

1. Turn the backrest upside down and orient it so the holes on the bottom line up with the holes on the tilt mechanism.
2. Insert the screws and tighten them down with the allen wrench.

Alright, we’ve got the backrest mounted solidly. Your spine will thank you later.

Step 5: Attach the Seat

Next up is installing the seat to the tilt mechanism. This is the comfy cushioned part you’ll be parking yourself on for hours of gaming.

1. Flip the seat upside down so the holes underneath are visible.
2. Line up the holes with the holes at the front of the tilt mechanism.
3. Insert the screws and tighten them down nice and snug with the wrench.

We’re in the home stretch now. Just a couple more steps to go.

Step 6: Install the Armrests

Most gaming chairs have adjustable 3D armrests that you can move up/down, in/out, and rotate. Let’s get them locked in.

1. Take the armrests and slide them into the slots on the bottom of the seat. You’ll hear a click when they lock into place.
2. To adjust them, use the buttons underneath. Play around until you find a comfortable position.

Step 7: Add the Pillows

Alright, final step – jazz it up with the pillows! Most gaming chairs come with a headrest pillow and a lumbar support pillow. These make long sessions even more comfortable.

1. Simply place the lumbar support pillow in the curve of your lower back.
2. Then prop the headrest pillow at the top of the chair.
3. Adjust them as needed until you’re comfy and supported.

Congrats, Your Chair is Ready!

Woo! That’s it – setup is complete! Wasn’t too bad, right? Now give your new S Racer chair a spin and adjust it to find your perfect position.

A few tips:

• Use the handle under the seat to raise/lower it to the ideal height. Your feet should rest flat on the floor with knees at a 90-120 degree angle.
• Recline the backrest between 90-160 degrees until your posture feels supported.
• Adjust the armrest height so your shoulders are relaxed with elbows at a 90 degree angle.
• Roll those casters around and enjoy the smooth mobility!

Alright, it’s time to break in your new throne. Grab your favorite snacks and beverages, fire up that gaming rig, and settle in for many epic gaming sessions.

That S Racer is gonna treat your backside real nice. No more soreness and fatigue after long matches. Just pure, uninterrupted comfort.

Key Features and Benefits of the S Racer Gaming Chair

Now that your S Racer chair is fully assembled, let’s dive into some of its stand-out features and benefits compared to standard office chairs.

Ergonomic Design

Gaming chairs are engineered for ergonomic support and comfort during extended sitting. The S Racer chair is designed based on research of the natural curvature of the human spine.

Here are some of its ergonomic design elements:

• Contoured backrest supports the natural lumbar curve of your lower back. This prevents slouching and fatigue.
• Integrated headrest pillow takes pressure off your neck if you recline.
• Deep seat cushion made of high-density foam conforms to your shape. This distributes weight evenly and reduces pressure points.
• Textured PU leather upholstery is more breathable than fabric. This keeps you cool during marathon sessions.
• Adjustable armrests move in multiple directions to perfectly fit your body shape and desk height.

Customization Options

A major perk of gaming chairs is the amount of customization available. You can tailor both the aesthetics and ergonomics to match your style and body.

Some custom features of the S Racer include:

• Color options – choose from black, blue, red, white, etc.
• Height adjustment – raise or lower the seat height from 17.5” to 21.5”.
• Recline settings – lock the backrest upright or recline from 90° to 160° degrees.
• Armrest adjustments – move armrests up/down, in/out, forward/back, and rotate them.
• 2D tilt mechanism – rock back and forth or lock in an upright position.
• Removable headrest and lumbar cushions – place them exactly where you need support.

High Weight Capacity

Gaming chairs are built solid. No flimsy materials here. The S Racer can support users weighing up to 300 pounds.

The heavy duty frame, base, and hydraulics provide stability and durability. The explosion-proof gas lift cylinder allows the chair to be lowered smoothly without slamming down.

So the S Racer can easily handle extended sitting time from gamers of all sizes without shaking or wobbling.

Reclining Positions

One awesome feature of gaming chairs is the ability to recline back at different angles. This opens up a whole range of ergonomic positions.

The S Racer allows you to recline between 90° to 160° degrees. Why would you want to lay nearly flat?

Reclining fully can take pressure off your lower back if you’re dealing with pain or soreness. It also allows you to relax more, take a quick nap, or watch movies.

The tilt mechanism lets you rock back and forth while reclined to stay active and reduce stiffness.

High-end Materials

Gaming chairs are made of higher quality materials than typical office chairs. The S Racer uses very durable, long-lasting components.

• Integrated metal frame reinforced with a steel plate for stability.
• Class 4 explosion-proof gas lift rated for 24/7 use.
• Heavy duty base with 2″ PU casters that roll smoothly and prevent scratches.
• High-density mold shaping foam that retains its elasticity and won’t flatten.

With its premium materials and solid steel frame, the S Racer is built to handle years of intense gaming. No creaking or breaking down.

Cost Efficiency

When compared to other ergonomic desk chairs with similar features, gaming chairs are very cost efficient.

The S Racer has all the perks of a high-end ergonomic chair at a fraction of the price.

• Fully adjustable armrests – $100+ add-on for office chairs.
• Reclining capability – Around $300+ add-on for office chairs.
• 2D adjustable tilt mechanism – $150+ option for office chairs.

Since these features are standard on the S Racer, you’re getting substantially more for your dollar compared to pricier alternatives like Herman Miller Aeron or Steelcase Leap chairs.

Health Benefits of the S Racer Gaming Chair

You’re probably well aware that sitting for prolonged periods is rough on your body. Back pain, neck stiffness, headaches, and circulation issues can crop up.

Luckily, the S Racer gaming chair is designed to minimize these problems and improve posture and comfort while sitting.

Here are some of the key health benefits:

1. Maintains Proper Spinal Alignment

Prolonged sitting can cause your lower back to curve unnaturally, putting strain on your spine. This leads to soreness, fatigue, and poor posture over time.

The S Racer’s lumbar support cushion positions your lower back in a neutral, straight posture. This takes pressure off the spinal discs and reduces pain.

2. Reduces Neck and Shoulder Issues

Hunching over a computer screen strains your neck and shoulders. Gamers are especially susceptible with the focus required during matches.

The S Racer’s integrated headrest pillow alleviates this by providing support if you recline. Your head, neck, and upper spine remain properly aligned.

3. Boosts Circulation

Sitting for too long can restrict blood flow to your lower body. This leads to swelling, numbness, and varicose veins.

The S Racer allows you to periodically recline, take pressure off your legs, and improve circulation. The tilt mechanism also enables you to gently rock to keep blood pumping.

4. Decreases Fatigue

Gaming for hours on uncomfortable chairs leaves you exhausted. Pressure points develop leading to distraction and frequent position shifting.

The S Racer’s plush cushioning immerses your body to evenly distribute weight. This minimizes pressure points so you stay alert and focused.

5. Improves Concentration

Discomfort negatively impacts gaming performance. You end up focusing more on your aching body than on clutch headshots or race lines.

Relaxing in the S Racer’s padded cushions blocks out distractions so you can achieve higher levels of concentration and reaction time.

6. Promotes Active Sitting

Static sitting tenses up your muscles leading to stiffness and lethargy. The S Racer allows you to rock, swivel, recline, and adjust armrests to get your body moving.

This light activity engages your core and prevents the sluggishness that comes with motionless sitting for hours on end.

So if you spend long days grinding XP or pwning noobs, an ergonomic gaming chair like the S Racer can really improve your health, comfort, and performance.

Tips for Setting Up Your Gaming Station with the S Racer

You’ve assembled your S Racer and are fired up to start blitzing n00bs. But before you dive in, let’s make sure your overall gaming setup is dialed for maximum comfort and performance.

Here are some pro tips for integrating your new chair into an ergonomic battlestation:

Position Your Chair at an Angle

Don’t position your chair squarely facing the monitor. This strains your neck. Instead angle the chair approximately 25 degrees towards the screen. Now you can glance over more naturally without excessive twisting.

Adjust Monitor Height

Your monitor should be positioned so the top rests at or slightly below eye level. This allows you to look straight ahead without dropping or raising your chin, minimizing neck strain.

Mind the Gap

Place your chair close enough to the desk so your elbows rest comfortably on the surface without overreaching. But don’t sit so close that your thighs hit the edge. Leave about a hands width between the front of the seat and the desk.

Get That Lumbar Support

Be sure to utilize the included lumbar pillow. Slide it under your lower back until it feels like your pelvis is neutrally tucked. This prevents slouching.

Kick Back and Recline

Take advantage of the S Racer’s reclining feature. Setting the backrest between 105-120 degrees opens up your hips, reduces hunching, and takes pressure off the spinal discs.

Keep Your Feet Flat

Plant your feet flat on the floor without lifting your heels. Having floating heels cuts off proper circulation to your lower legs and feet leading to swelling and edema.

Try a Foot Rest

If your feet don’t quite touch the floor, use a foot rest to support them. Having dangling legs restricts blood flow. A sturdy foam foot rest alleviates this.

Adjust Those Arm Rests

Experiment with the armrest positions to find the sweet spot where your shoulders relax without slouching and your elbows rest at a 90-100 degree angle.

Get the Right Desk Height

Your desk should be high enough so your forearms are parallel to the floor. If it’s too low you’ll be forced to lift your shoulders causing neck and upper back tension.

Set yourself up for long-term comfort and success by taking the time to optimize the ergonomics of your entire gaming zone. Little tweaks make a huge difference over thousands of hours of playtime.

Common Problems When Assembling the S Racer

Putting together any piece of furniture can be tricky. Don’t feel bad if you ran into some hiccups with the S Racer assembly. Even the pros run into issues.

Let’s go over some of the most common problems and fixes:

Missing or Incorrect Parts

First check all hardware bags against the instruction manual. Contact the seller right away if anything is missing or the wrong size. Some parts may look very similar.

Screws Not Tightening

If the screws spin without catching, make sure the holes are properly aligned between pieces. Also verify you have the correct screw size. Using too small or large screws prevents tightening.

Seat Wobbles From Side to Side

The base legs need tightened evenly so the chair sits level. Tighten one side just a bit, then the other. Gradually alternate sides until stable.

Seat Sinks Down When Sitting

The gas lift cylinder likely wasn’t pushed in firmly. Re-insert the end into the base. You’ll need to use some force. Make sure the plastic cap is on to prevent grease getting on your clothes.

Tilt Lock Doesn’t Work

The tilt mechanism pawl may be misaligned with the teeth track. Try pushing the backrest down firmly and rocking hard to force it into place. Spraying a dry lubricant can help too.

Armrests Don’t Stay Locked

If the armrests slide or drop down, the tension knobs underneath likely need tightened. Rotate them clockwise incrementally until the armrests stay put when pulled upwards.

Headrest Pillow Won’t Stay Up

Some neck pillows don’t have enough friction to stay vertical. Try molding the pillow over your headrest then leaning back firmly to imprint the shape. Or use double-sided tape.

Assembling any new furniture can be quirky. Just have patience, follow all steps carefully, and don’t force anything. Those gaming glory kills will be so worth it!

Maintaining Your S Racer Gaming Chair

Your S Racer chair is built to last. But like any piece of equipment, it requires proper maintenance and care for peak performance year after year.

Follow these tips and your chair will provide endless comfort through even the most epic gaming sessions.

1. Inspect the Levers and Knobs

Periodically check that the adjustment levers and knobs are tight and functioning properly. If knobs are loose, your chair will rock or sink. Simple tightening with the allen wrench prevents this.

2. Check the Hydraulic Cylinder

Make sure the hydraulic cylinder that controls height adjustment is securely connected to the base and chair. If it comes loose, re-insert the rod into the base firmly until fully seated.

3. Keep Casters Clean

Prevent caster wheels from dragging or sticking by cleaning debris from around the stems with a paperclip or needle. A gentle wipe down removes surface dirt and dust.

4. Tighten Loose Screws

It’s normal for screws to loosen slightly over time. Every few months, do a quick check with the allen wrench to tighten any that feel looser than normal. This prevents parts from separating.

5. Clean the Upholstery

Wipe down the PU leather regularly with a damp soft cloth to prevent oils from hands and hair building up. Use gentle soap only if needed. Avoid harsh cleaners that could break down the material.

6. Let the Chair Breathe

If you sweat heavily or spill drinks, let the seat and cushions air out completely before using again. This prevents moisture damage long-term. Rotating cushions evenly dissipates wear.

Troubleshooting Common Issues with Your S Racer

Hopefully everything is smooth sailing with your new S Racer. But if you do run into any problems, here are some troubleshooting tips for the most common issues:

Problem: Chair Sinks Down When Sitting

Potential Solutions:

• The gas lift cylinder is not fully secure in the base. Re-insert it firmly until seated.
• The hydraulic grease has dried up. Try squirting in a small amount of lubricant like TriFlow.
• Your weight limit exceeds the 300 lb capacity. Upgrade to an XL model rated for heavier users.

Problem: Chair Doesn’t Recline All The Way

Potential Solutions:

• The tilt tension knob underneath needs adjusted. Turn it counterclockwise until desired resistance is reached.
• The tilt lock lever is still engaged in an upright position. Make sure it’s pushed back to disable the lock.
• The backrest needs re-aligned. Loosen screws, realign, then firmly tighten screws again.

Problem: Armrests Don’t Stay Locked

Potential Solutions:

• The tension knobs need tightened. Turn them clockwise gradually until armrests stay locked in position when pulled up.
• Plastic locking clips are broken or missing. Replace clips or contact seller for replacements.
• Armrest stems need lubrication. Spray a dry lubricant like TriFlow into the joint.

Problem: Wheels Don’t Roll Smoothly

Potential Solutions:

• Debris, dust or hair is stuck in wheels. Remove with a paperclip or tweezers.
• Wheels need lubrication. Flip chair over and apply a small amount of silicone lubricant to wheel joints.
• Screws are too tight on wheels. They need room to spin freely. Loosen screws slightly.

Problem: Leather Is Cracking or Peeling

Potential Solutions:

• Leather cleaner dried it out. Use only gentle soap and water. Avoid harsh chemicals.
• Chair is exposed to direct sunlight. Fade and cracks can develop. Keep away from windows.
• User weight limit was exceeded. PU leather weakens over capacity.

Don’t hesitate to contact the seller if any defect seems beyond a quick fix. Most have solid warranties to protect against premature issues. Just be sure to follow proper maintenance procedures. With a little care, your S Racer will stay rolling smooth for years on end!

Frequently Asked Questions

1. How long does assembly take?

Assembly takes 30-60 minutes for most people. Be sure to follow all instructions carefully and have the proper tools ready. Rushing through steps can lead to improper alignment.

1. What is the weight capacity?

The standard S Racer chair supports up to 300 pounds. An XL version is available supporting up to 400 pounds if needed. Weight capacities refer to overall user weight including height.

1. How easy are parts to replace?

Standard parts like armrests, casters, and hydraulic cylinders can be ordered directly from the manufacturer if any fail or become damaged. Most parts can be switched out easily with included tools.

1. Can you sit cross-legged?

Yes, the flexible padded seat and wide stance of the base does allow for cross-legged sitting. Just be aware this can scuff the PU leather over time. A small pillow can protect the surface.

1. Do wheels work on carpet?

Yes, the multi-directional wheels work well and roll smoothly across both hard floors and medium-pile carpeting without catching or dragging. They may require more force to move on high-pile plush carpeting.

Conclusion

The S Racer delivers exceptional comfort, support, and customizability for dedicated gamers. Following the proper setup process ensures you’ll be dominating in style for years of peak gaming performance. Maintain your chair well and it will maintain you in return.

Level up your gaming experience with GameStop headsets, offering immersive sound quality and crystal-clear communication. Combine the high-performance S Racer headset with its ergonomic design, high-end components, and cost efficiency, providing incredible bang for your buck. Enhance your gaming setup further by making simple additions like a footrest and optimizing your desk position to promote proper posture and reduce the risks of prolonged sitting as you grind out the wins.